性高潮久久久久,情侣奴vk,日韩国产欧美在线观看

PRODUCTS

Recommended products

Your current location: ProductsRegulating ValvePneumatic Bellows Regulating Valve

ZJHPW Pneumatic Bellows Regulating Valve

Product overview

Product model: ZJHPW
Nominal diameter: DN10 ~ 50mm
Nominal pressure: PN22, 32MPa
Ambient temperature: -30 ~ +70℃
Main material: forged steel, cast stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti), 316L, etc
Applicable medium: corrosive liquid, ultra-clean liquid, edible liquid
Drive mode: pneumatic
Design standard: GB/T17213
Flange standard: GB/T9113, JB/T79, HG20594 and other standards
Inspection standard: GB/T4213
Connection type: flange (FF RF RTJ), welding (SW BW), thread (applicable to less than 1 ")

ZJHPW Pneumatic Bellows Regulating Valve product details

The ZJHPW pneumatic bellows regulating valve produced and sold by Baigang Valve Group is used in industrial process automation control system.It can automatically open or close when receiving the electronic control signal to realize the on-off or flow control of the fluid in the pipeline.This series of solenoid valve can be widely used in textile, printing, chemical, plastic, rubber, pharmaceutical, food, building materials, machinery, electrical appliances, surface treatment and other production and research departments and bathroom, canteen, air conditioning and other People's Daily living facilities.ZJHPW bellows seal pneumatic single seat control valve is mainly used for corrosive liquid, ultra-clean liquid and edible liquid media control.

ZJHPW Pneumatic Bellows Regulating Valve technical parameters

Working medium	Corrosive liquid, clean liquid, food liquid ZBSF-1: ZBSF-1Y for gas: ZBSF-2 for liquid : ZBSF-2Y for gas: liquid
Medium temperature ℃	ZBSF-1 (1Y) ≤60 ℃ ZBSF-2 (2Y) ≤200 ℃
Working pressure difference Mpa	0 ~ 1.6
voltage	AC220V other specifications for special order
Service life	By JB / T7352-94 regulations
Rated flow coefficient KV
Leakage ml / min	According to JB / T7352-94 · F regulations
Power consumption	40	50

ZJHPW Pneumatic Bellows Regulating Valve seal Features Description

ZJHPW bellows sealed pneumatic single-seat control valve, is a top-oriented structure of the control valve, compact body structure, the flow was S-streamline pipeline, pressure loss loss, flow, adjustable wide range.

The bonnet seal structure with corrugated pipe can completely eliminate the possibility of leakage of process media from the stem movement gap, which is one of the notable features of the bellows sealed valve. Due to their inherent deformability and outstanding aging resistance, the bellows valve completely overcomes the filler weathering and temperature-sensitivity issues commonly associated with packing valves. Second, the use of double bellows - packing seal structure, better safety and reliability. Therefore, it is widely used in the automatic control system of rare special media such as highly toxic, corrosive, radioactive and so on. Large spool guide area, good vibration resistance, with multi-spring film actuator, its compact structure, the output power.

ZJHPW Pneumatic Bellows Regulating Valve Type
Nominal diameter: 10,15,25,32,40,50 mm
Nominal pressure: PN22, 32MPa
Flange standard: H12-67
Material: forged steel, cast stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti), 316L, etc.
Upper bonnet: Normal type: -40 ~ + 230 ℃, Radiator: + 230 ~ + 450 ℃
Gland type: Bolt press type
packing: V type PTFE packing, asbestos braided packing, Graphite packing

ZJHPW Pneumatic Bellows Regulating Valve seal assembly

Single-seat spool-type spool
flow characteristics: equal percentage characteristics and linear characteristics of
materials: stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti, 316L), 6YC1, stainless steel surfacing Division Tai Lai alloy

ZJHPW Pneumatic Bellows Regulating Valve actuator
spring range: 20 ~ 100 (standard), 40-200,80-240,20-60,60-100KPa
Diaphragm materials: rubber clip nylon cloth, ethylene propylene rubber Clip Nylon cloth
Supply pressure: 140 ~ 400KPa
Air supply interface: RC1 / 4 "
Ambient temperature: -30 ~ +70 ℃

ZJHPW Pneumatic Bellows Regulating Valve installation size

DN	L	H	D	D1	D2	b	f	nd
10	115	153	90	60	41	14	3	4-φ14
15	115	153	95	65	46	14	3	4-φ14
20	115	153	105	75	56	16	3	4-φ14
25	125	153	115	85	65	16	3	4-φ14
32	150	176	140	100	76	18	3	4-φ18
40	165	176	150	110	84	18	3	4-φ18
50	190	192	165	125	99	20	3	4-φ18

Reminder:

All text, data and pictures in this article are for reference only.To see more details of the ZJHPW Pneumatic Bellows Regulating Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

Next：High Pressure Differential - High Performance Angle Regulating Valve

Previous：Pneumatic Double Seat Regulating Valve